La VPI Player es la primer bandeja giradiscos todo en uno high-end de entrada de gama . Completa con amplificador de auriculares , pre de phono incorporado , y capsula Ortofon 2M Red montada en un brazo Gimballed / Yoke bearing y es la perfecta solucion para disfrutar de sus vinilos . Tambien ofrece conectores RCA ofreciendo la facilidad de conectarla a un amplificdor standar o parlantes potenciados .
The Table
- 1.25”” thick textured vinyl covered non-resonant MDF chassis.
- 16″ x 11″ footprint
- 19” x 14” x6” overall size
- Aluminum Platter
- Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling.
- The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.
Tonearm
- New 9” vertical Yoke type tonearm with lateral turntable type bearing.
- Pivot to spindle: 223mm
- Effective length: 240.7mm
- Overhang: 17.7mm
- Offset angle: 22.85 degrees
- Average RMS distortion: .36%
- VTA adjustable arm mount.
- Damped stainless steel armtube.
- Very pure copper wire, twisted with special insulating jacket.
- The armbase is upgradeable to a standard JMW 9 arm.
ESPECIFICACIONES TECNICAS
- Type Belt drive (manual turntable)
- Motor 24v synchronous AC motor
- Turntable Platter Aluminum Diameter 11.81” (30.0 cm)
- Turntable Speeds 33.3 RPM and 45 RPM
- Wow and Flutter .1% WRMS (in accordance with DIN specification) 0.04% Flutter in accordance with DIN specification)
- Rumble < – 80dB (IEC 98A unweighted)
- Cartridge Ortofon 2M Red Output 5 mV @ 1 KHz Tracking Force 1.5 grams (recommended)
- Input Load 47K
- Weight 5.5 grams
- Power Supply 220v VAC @ 50 Hz,
- Power Consumption 7.7 watts at full output
- Dimensions 18.5” (470 mm) W x 13.5” (343 mm) D x 4.3” (109 mm)H
- Weight 12.9 lbs. (5.9 kg)